ORLA NAILS Request a quote 0

Quality and compliance

EU press-on nail testing and labelling: what to prepare before selling in Europe

Labels are where compliance becomes visible. What an EU press-on pack usually carries, which tests support it, and which official pages to check.

Unprinted nail carton, blank label roll and a sealed set of pink press-ons on a lab bench

This guide is a buyer’s checklist, not legal advice. Rules change and classification depends on your exact product, kit and claims. Confirm requirements with the official sources linked here and with a qualified regulatory adviser or your appointed Responsible Person before you sell.

Start with classification

A press-on kit is several products in one box: plastic nail tips, an adhesive, often a prep pad, sometimes a remover or oil. Regulators can treat these components differently. In many markets, products applied to the body to change its appearance, such as nail glue, polish or cuticle oil, fall under cosmetics rules, while the plastic tips themselves may be assessed as consumer articles under general product safety rules. The European Commission notes that borderline cases are decided case by case. Agree the classification of each component with your regulatory adviser before you plan testing and labels.

What an EU cosmetic label usually includes

If a component of your kit is a cosmetic product, such as the glue, its packaging normally carries:

ElementWhat to prepare
Responsible PersonName and address of the EU-based person responsible for the product
IngredientsFull ingredient list using standard ingredient names
Batch numberA code that traces the unit to its production batch
FunctionWhat the product is for, where not obvious from presentation
DurabilityDate of minimum durability or period after opening, as applicable
Nominal contentWeight or volume, where required
PrecautionsWarnings for use, for example for cyanoacrylate glue
LanguageThe languages required by each country where you sell

The exact requirements come from the EU cosmetics framework and national rules; confirm them with your Responsible Person. Start from the European Commission cosmetics pages.

The tips themselves, if treated as consumer articles, still need safe design, traceability information and clear instructions and warnings under general product safety rules.

Tests that typically sit behind the label

  • Safety assessment of each cosmetic component by a qualified assessor, using formula, exposure and test data.
  • Restricted substances and heavy metals screening of materials, pigments and coatings.
  • Stability of liquids such as glue and remover over the claimed shelf life.
  • Packaging compatibility, so the container does not react with the contents.
  • Microbiological testing where the formula can support microbial growth; your assessor decides.

Gel finishes and photoinitiators

Nail gels cured by light contain photoinitiators. The European Commission states that from 1 September 2025 both placing and making available on the market cosmetic products containing TPO are prohibited. Press-on nails finished with gel at the factory are a different product from salon gel, but you should still ask your supplier which photoinitiators are used and get the answer in writing. Sensitising ingredients such as some methacrylates also deserve clear questions and appropriate warnings.

Claims need evidence

Claims such as “non-damaging”, “vegan”, “waterproof”, “reusable” or “lasts two weeks” must be supported by evidence. Keep the test or rationale behind each claim on file and agree wording with your Responsible Person before printing.

Where it all comes together

For cosmetic components, the product information file held by the Responsible Person brings together the product description, safety report, manufacturing method, evidence for claims and data on undesirable effects. See documents for selling in the EU for what to request from the factory.

Preparation checklist

  • Component list with proposed classification for each part of the kit.
  • Responsible Person appointed and briefed.
  • Ingredient lists and safety data sheets from the factory.
  • Test plan agreed with your assessor.
  • Label artwork reviewed for each country and language.
  • Batch coding agreed and printed on every unit.

Build the pack review by component

A tray of solid tips, a glue bottle and a prep pad may need separate assessments. Start with three component records and add one for each extra liquid or accessory. Confirm the classification in the actual destination.

CheckpointCalculation or evidenceBuying decision
TipsRecord the sizes, material, intended use and a lot identifier that connects the pack to the retained sample.Make the buyer and manufacturer agree the traceability record.
Liquid preparationRequest its formulation, intended purpose and proposed warnings.Have the responsible specialist determine the applicable regime before authorising print.
Final packProof the primary container, retail box and online listing against the same approved version.A correction on one surface should prompt a check of the other two.

For components that qualify as cosmetics, the Commission explains how the single EU cosmetic notification works. It does not replace a component-specific safety assessment. Preserve a dated proof and sign-off alongside the notification record.

Start with a sample

Choose finishes in the sample book, set shape, material and colour, then submit your request for pricing or samples.

Get a quoteOpen the sample book